Honeywell 2MLF-AV8A User Manual page 104

5. Configuration and Function of Internal Memory
5.5. PUT/GET function block use area (parameter area)
Error code
1.
2.
B15 B14 B13 B12
- - - -
104
ATTENTION
For setting Time/Count average process value, enable average process..
Saves error code detected at A/D conversion module.
The following figure is a program example for reading error code
B11 B10 B9
- - -
Error Code
(Decimal)
0 Normal RUN
20 Module error (A/D Conversion
Error)
40#
Offset value of 1~5V (4~20mA)
range is set as larger or equal than
gain value
Analog Input Module 2MLF-AV8A, AC8A User's Guide
B8 B7 B6 B5
- Error Code
Error Contents
Honeywell
B4 B3 B2
Remark
RUN LED on
RUN LED flickers every
0.2s
R200
September 2010
B1 B0