Operating Procedures And Monitoring; Operating Procedures; Figure 9 - Operating Procedure - Honeywell 2MLF-AV8A User Manual

4. Operating Procedures and Monitoring

4.1

Operating procedures

The following flowchart illustrates the procedure to initialize the operation of the Analog
Input Module.
R200 Analog Input Module 2MLF-AV8A, AC8A User's Guide
September 2010
Start
Install A/D conversion module on the slot
Connect A/D conversion module with the
external device
Will you specify Run
parameters through [I/O
parameters] setting?
YES
Specify Run parameters through [I/O
parameters] setting
Prepare PLC program
End
Figure 9 – Operating procedure
Honeywell
NO
53