Figure 18: Populating The Genius Io Devices To Be Controlled By The Genius Gateway; Figure 19: Populating Slots In S90-70 Rack Controlled By Remote I/O Scanner (Bem733) - GE GFK-2892F User Manual

Chapter 3. Configuration

Figure 18: Populating the Genius IO Devices to be Controlled by the Genius Gateway

13. Special consideration needs to be given to the configuration of a Series 90-70 Remote I/O Scanner
(BEM733) device on the Genius Bus, since this device is capable of controlling a rack filled with I/O
modules, each of which needs to be suitably configured.
a. Add the BEM733 to the Genius Bus configuration as described above.
b. Drill down into the BEM733. A display of rack I/O will be presented (Figure 19).

Figure 19: Populating Slots in S90-70 Rack Controlled by Remote I/O Scanner (BEM733)

30 PACSystems RX3i Genius Communications Gateway GFK-2892F