Configuring The Genius Gateway To Operate With The Rx3I Cpu - GE GFK-2892F User Manual

Chapter 2. Installation
2.5 Configuring the Genius Gateway to Operate with the RX3i
CPU
1) Start the PME application, then open or create the project which contains the GCG001 module.
2) Configuring the rack, power supply, CPU and PROFINET Controller in the Project tab of the
Navigator
3) Follow the instructions in the PACSystems RX3i & RSTi-EP PROFINET I/O Controller Manual
GFK-2571, for adding devices to the PROFINET IO Network. The GCG001 will be one of those
devices.
4) Note that each IO Device connected to the GCG001 will be mapped per the RX3i PROFINET
Controller configuration.
24 PACSystems RX3i Genius Communications Gateway GFK-2892F