Download Print this page

Cisco ASA 5506-X Configuration Manual page 9

Cli
Hide thumbs Also See for ASA 5506-X:

Advertisement

Chapter 1
Service Policy Using the Modular Policy Framework
: in the service policy map.
: In ASDM, this maps to call-out 4, rule actions, for the sip-class-inside policy.
policy-map type inspect sip sip-high
parameters
rtp-conformance enforce-payloadtype
no traffic-non-sip
software-version action mask log
uri-non-sip action mask log
state-checking action drop-connection log
max-forwards-validation action drop log
strict-header-validation action drop log
: Class map to define traffic matching for the inside-class rule.
: In ASDM, this maps to call-out 3, from the Match to the Time fields.
class-map inside-class
match access-list inside_mpc_1
: Class map to define traffic matching for the sip-class-inside rule.
: In ASDM, this maps to call-out 3, from the Match to the Time fields.
class-map sip-class-inside
match access-list inside_mpc
: Class map to define traffic matching for the inside-class1 rule.
: In ASDM, this maps to call-out 3, from the Match to the Time fields.
class-map inside-class1
match access-list inside_mpc_2
: Policy map that actually defines the service policy rule set named test-inside-policy.
: In ASDM, this corresponds to the folder at call-out 1.
policy-map test-inside-policy
: First rule in test-inside-policy, named sip-class-inside. Inspects SIP traffic.
: The sip-class-inside rule applies the sip-high inspection policy map to SIP inspection.
: In ASDM, each rule corresponds to call-out 2.
class sip-class-inside
inspect sip sip-high
: Second rule, inside-class. Applies SNMP inspection using an SNMP map.
class inside-class
inspect snmp snmp-v3only
: Third rule, inside-class1. Applies ICMP inspection.
class inside-class1
inspect icmp
: Fourth rule, class-default. Applies connection settings and enables user statistics.
class class-default
set connection timeout embryonic 0:00:30 half-closed 0:10:00 idle 1:00:00
reset dcd 0:15:00 5
user-statistics accounting
: The service-policy command applies the policy map rule set to the inside interface.
: This command activates the policies.
service-policy test-inside-policy interface inside
Cisco ASA Series Firewall CLI Configuration Guide
About Service Policies
1-3

Hide quick links:

Advertisement

loading