Cisco ASA 5506-X Configuration Manual page 419

Chapter 18 ASA IPS Module
Reloading or Resetting the Module
To reload or reset the module, enter one of the following commands at the ASA CLI.
Detailed Steps
Command
For a hardware module (for example, the ASA
5585-X):
hw-module module 1 reload
For a software module (for example, the ASA
5545-X):
sw-module module ips reload
Example:
hostname# hw-module module 1 reload
For a hardware module:
hw-module module 1 reset
For a software module:
sw-module module ips reset
Example:
hostname# hw-module module 1 reset
Monitoring the ASA IPS module
To check the status of a module, enter one of the following commands:
Command
show module
show module {1 | ips} details
show module {1 | ips} recover
Examples
The following is sample output from the show module details command, which provides additional
information for an ASA with an SSC installed:
hostname# show module 1 details
Getting details from the Service Module, please wait...
ASA 5500 Series Security Services Card-5
Hardware version: 0.1
Purpose
Reloads the module software.
Performs a reset, and then reloads the module.
Purpose
Displays the status.
Displays additional status information. Specify 1 for a hardware module
and ips for a software module.
Displays the network parameters for transferring an image to the module.
Specify 1 for a hardware module and ips for a software module.
Cisco ASA Series Firewall CLI Configuration Guide
Monitoring the ASA IPS module
18-21