Cisco ASA 5506-X Configuration Manual page 392

Monitoring the ASA CX Module
Monitoring the ASA CX Module
The following topics provide guidance on monitoring the module. For ASA CX-related syslog messages,
see the syslog messages guide. ASA CX syslog messages start with message number 429001.
•
•
•
Showing Module Status
To check the status of a module, enter one of the following commands:
•
•
The following is sample output from the show module command for an ASA with an ASA CX SSP
installed:
hostname# show module
Mod Card Type
--- -------------------------------------------- ------------------ -----------
0 ASA 5585-X Security Services Processor-10 wi ASA5585-SSP-10
1 ASA 5585-X CX Security Services Processor-10 ASA5585-SSP-CX10
Mod MAC Address Range
--- --------------------------------- ------------ ------------ ---------------
0 5475.d05b.1100 to 5475.d05b.110b
1 5475.d05b.2450 to 5475.d05b.245b
Mod SSM Application Name
--- ------------------------------ ---------------- --------------------------
1 ASA CX Security Module
Mod Status
--- ------------------ --------------------- -------------
0 Up Sys
1 Up
Showing Module Statistics
Use the show service-policy cxsc command to display statistics and status for each service policy that
includes the cxsc command. Use clear service-policy to clear the counters.
The following is sample output from the show service-policy command showing the ASA CX policy
and the current statistics as well as the module status when the authentication proxy is disabled:
hostname# show service-policy cxsc
Global policy:
Service-policy: global_policy
Cisco ASA Series Firewall CLI Configuration Guide
17-22
Showing Module Status, page 17-22
Showing Module Statistics, page 17-22
Monitoring Module Connections, page 17-23
show module [1 | cxsc] [details]
Shows the status of modules. Include the 1 (for hardware modules) or cxsc (for software modules)
keyword to see status specific to the ASA CX module. Include the details keyword to get additional
information, including the address of the device that manages the module.
show module cxsc recover
Displays the location of the boot image used when installing the module.
Data Plane Status
Not Applicable
Up
Model
Hw Version Fw Version
1.0 2.0(7)0
1.0 2.0(13)0
Status SSM Application Version
Up 0.6.1
Compatibility
Chapter 17 ASA CX Module
Serial No.
JAF1507AMKE
JAF1510BLSA
Sw Version
100.7(6)78
0.6.1