Figure 123 - System Configuration; Application Program - Honeywell 2MLF-HO2A User Manual

7.7

Application Program

Program to Move the Object Car
System Configuration
Operational Details
The motor is used for moving the object car. This motor rotates with the start signal
effectively moving the object car. High Speed Counter then counts the pulses from the
encoder installed on the motor. The pulse count is used to derive the distance moved and
to stop the object car at the 1st stop position. When the 1st Work Complete Signal is ON,
the motor then moves the object car to the 2nd stop position and stops. When the 2nd
Work Complete Signal is ON, it moves the object car back to the start position by means
of reverse rotation.
R200 2MLF-HO2A, 2MLF-HD2A High Speed Counter Module User's Guide
May 2010
Figure 123 – System Configuration
Honeywell
7. Programming
7.7. Application Program
179