Figure 45 - Configuration Of Put/Putp Instruction; Type; Write Internal Memory - Honeywell 2MLF-HO2A User Manual

Write Internal Memory

Write instruction is used for writing data from 2MLK CPU module onto High Speed
Counter Module's internal memory. This is that data which is saved on the CPU's
memory area and the integer [Decimal (00) or Hexadecimal (H00)].
1. PUT/PUTP Instruction
PUT
Always executed with execution condition On
PUTP
Executed with execution condition of operation Start
2. Configuration of PUT/PUTP Instruction
Execution
condition
Figure 44 – Configuration of PUT/PUTP Instruction

Type

n1 Slot No., on which special module is installed
Start address of special module's internal memory to write
n2
data.
n3 Start address of device integer with saved data to write
n3 Number of words of data to be written
a) Setting base and slot number
R200 2MLF-HO2A, 2MLF-HD2A High Speed Counter Module User's Guide
May 2010
PUT
Description
Honeywell
7. Programming
7.2. Read/Write Internal Memory
n1 n2 n3 n4
Area Available
Integer
Integer
M, P, K, L, T, C, D, #D
Integer
Level
Edge
103