Figure 68 - Scan Program For Auxiliary Mode Setting 2 - Honeywell 2MLF-HO2A User Manual

7. Programming
7.4. Basic Program
Figure 68 – Scan Program for Auxiliary Mode Setting 2
3. Sampling Count: Figure 69 shows the example of setting Auxiliary Mode to 3 i.e.
Sampling Count through I/O parameters. Section setting value for the sampling
section is also set to 1000ms (1s) respectively for channels 0 and 1 in this figure.
Figure 71 shows an example of the scan program with Auxiliary Mode set to 3
(Sampling Count), additional function operation enabled and then present section
count value read.
130 2MLF-HO2A, 2MLF-HD2A High Speed Counter Module User's Guide
Honeywell
R200
May 2010