Cisco 7000 Series Hardware Installation And Maintenance Manual page 82

Preparing Network Connections
For multimode connections, connect the multimode interface cable to the media interface cable
(MIC) connector. (See Figure 2-7.)
Figure 2-7
For multimode SONET connections, connect the multimode cable to the SC connector on the PLIM.
(See Figure 2-8.)
Figure 2-8
The SONET multimode SC-duplex connector is shipped with a dust plug. (See Figure 2-9.) Remove
the plug by pulling on the plug as you squeeze the sides.
Figure 2-9
2-22 Cisco 7010 Hardware Installation and Maintenance
MIC Connector on a 4B/5B PLIM
SONET Multimode SC Duplex PLIM
SONET ATM Multimode Fiber-Optic Transceiver and Dust Plug