Cisco 7000 Series Hardware Installation And Maintenance Manual page 17

Figure 1-1 Cisco 7000 Series Routers
Cisco 7010
The front, or noninterface processor end, of the Cisco 7010 is a removable cover panel that is secured
with two captive slotted fasteners. (See Figure 1-2.) Removing the cover panel provides access to
the three internal components: the arbiter, power supply, and fan tray.
Figure 1-2 Cisco 7010 Chassis Cover Panel
Captive fasteners
The interface processor end of the router contains the five-processor slots, the AC-input receptacle,
the power switch, and a power status LED indicator. The processor slots contain the RP, SP (or SSP),
and up to three interface processors. When viewing the router from the interface processor end, the
RP is in the top slot (the RP slot), and the SP (or SSP) is in the slot directly below the RP. The
remaining three slots are numbered from the bottom up beginning with slot 0 (the bottom slot)
through 2 (the center slot).
Cisco 7000
I
I
Physical Description
Product Overview 1-3