ABB UMC100-FBP Technical Description page 54

Universal Motor Controller
UMC100-FBP
Technical Description
The unchanged signal from the DI is always available for monitoring purposes (Input 1//3 status).
DI0
DI1
DI2
*) If a digital input is already used for the starter function (e.g. for torque inputs in the actuator modes or
for contactor checkback) they are not available anymore as multifunction inputs.
UMC100-FBP
*)
1
On Delay
Ton
*)
1 1
On Delay
Ton
*)
1 1
On Delay
Ton
≥1
≥1 ≥1
≥1 ≥1
- 54 -
V 6
Test Postion
≥1 ≥1
Motor Stop Delayed
≥1 ≥1
External Fault 0
Input 0 Status
Full
External Fault 1
Input 1 Status
External Fault 2
Input 2 Status
FieldBusPlug / Issue: 08.009