ABB UMC100-FBP Technical Description page 105

Universal Motor Controller
UMC100-FBP
V 6
Technical Description
Motor Management Parameters Continued
Para-
meter
Number

86
19
90
91
94
95
96
97
9
93
FieldBusPlug / Issue: 11.009
Parameter Description, Explanations
Checkback Selection of the checkback
supervision method.
Inching DI Enables inching (i.e. jogging)
start input of the start signal originating
(Jog) from a digital input.
Enable custom Enable the execution of a
logic customer deined application
Local Control Mode 1
Loc 1 start Allow the motor to be started
bus cyclic via cyclic bus command in
local mode 1
Loc 1 stop Allow the motor to be stop-
bus cyclic ped via cyclic bus command
in local mode 1
Loc1 start Allow the motor to be started
LCD via LCD panel in local mode
1
Loc1 stop Allow the motor to be stop-
LCD ped via LCD panel in local
mode 1
Loc1 start bus Allow the motor to be started
acyclic via acyclic bus command in
local mode 1 (e.g. from DTM)
Loc1 stop bus Allow the motor to be stop-
acyclic ped via acyclic bus com-
mand in local mode 1 (e.g.
from DTM)
Loc1 start DI Allow the motor to be started
via digital input in local mode
1
Loc1 stop DI Allow the motor to be stop-
ped via digital input in local
mode 1
Local Control Mode 
Options
Contact DI0 (1),
Current (),
Simulation (3)
No (0),
Yes (1)
No (0),
Yes (1)
No (0),
Yes (1)
No (0),
Yes (1)
No (0),
Yes (1)
No (0),
Yes (1)
No (0),
Yes (1)
No (0),
Yes (1)
No (0),
Yes (1)
No (0),
Yes (1)
- 105 -
Ad-
just-
able
via
All
All
All
All
UMC100-FBP