Viewing Attendant Console Status - Cisco SPA 504g User Manual

Viewing Attendant Console Status

The SPA500S or SPA500DS user parameters are displayed in the Attendant Console Status window.
The table identifies and describes the values in the Attendant Console Status tab.
Parameter
Unit Enable
Unit Online
Subscribe Expires
Subscribe Retry
Interval
HW Version
SW Version
Key
Name
Type
Line
Station
Description
Yes indicates the unit is enabled. No indicates it is disabled.
Yes indicates the unit is connected. No indicates it is not
connected.
Time in seconds when the current subscription expires. After the
subscription expires, the attendant console automatically
requests a new subscription.
Length of time the attendant console waits to try again if the
subscription fails.
Hardware version of the attendant console.
Firmware (software) version of the attendant console.
Name assigned to each key (1-32) on the Cisco SPA5000S or key
1-30 on the Cisco SPA500DS.
Name identifying the entry.
Function (for example, speed dial) that is enabled for each key on
the attendant console.
Displays the extension assigned to each key on the attendant
console.
Subscribe URI (uniform resource identifier) configured for each
key on the attendant console.
69