Unit 2; Attendant Console Status - Cisco SPA 501G Administration Manual

Cisco SPA 500 Series and Wireless IP Phone Field Reference

Attendant Console Status

Attendant Console Status
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide
Parameter
BLF List URI
Unit 1 Key 1-32
For more information, see
Attendant Console.".

Unit 2

See the description for Unit 1 above. Enter a strings that define the extension and
other parameters associated with each lighted button on the second Cisco SPA
500S unit. Keywords and values are case-sensitive. The configuration script is
described in the "Setting Up the Cisco SPA 500S Attendant Console" section
on page 180.
This page provides two tabs to display the status of up to two Cisco SPA 500S
units that are supported by a single IP phone:
• Unit 1—Displays information about the first Cisco SPA 500S unit.
• Unit 2—Displays information about the second Cisco SPA 500S unit.
Each tab provides the read-only fields described in the following table:
Parameter
Unit Enable
Description
Automatically configures BLF subscriptions for all
users on a monitored list. See
Busy Lamp Field Auto-Configuration, page
Enter a strings that define the extension and other
parameters associated with each lighted button on the
first Cisco SPA 500S unit. Keywords and values are
case-sensitive. The configuration script is described in
the "Unit/Key Configuration Scripts" section on
.
page 184
Chapter 9, "Configuring the Cisco SPA 500S
Description
Displays if the Unit is enabled or disabled.
B
Configuring BroadSoft
187.
282