Using Your Personal Directory; Viewing Attendant Console Status - Cisco SPA50X User Manual

Using the Phone Web User Interface

Using Your Personal Directory

Using Your Personal Directory
STEP 1
STEP 2
STEP 3
STEP 4

Viewing Attendant Console Status

Cisco Small Business SPA50X and SPA51X Series SPCP IP Phone User Guide
Your IP phone provides a phone directory for you to store and view frequently
dialed numbers. This directory appears on your phone, and you can dial numbers
from the directory. The Cisco SPA502G, Cisco SPA504G, Cisco SPA508G, and
Cisco SPA509G support up to 100 entries. The Cisco SPA512G and
Cisco SPA514G support up to 150 entries. (Not available for the Cisco SPA501G.)
To view and edit your personal directory:
Log in to the phone web user interface.
Click the Personal Directory tab. A window appears with the Personal Directory
listings for your phone.
To enter a new item into the directory, select the line and enter the information in
the following format:
n=entryname;p=nnnnnnnnnn
where "n=" indicates the name for the entry and "p=" indicates the phone
number (including area code), for example 5045551212.
At the bottom of the page, click Submit Changes.
The attendant console user parameters are displayed in the Attendant Console
Status window.
The table identifies and describes the values in the Attendant Console Status tab.
Parameter
Unit Enable
Unit Online
Subscribe
Expires
Description
Yes indicates the unit is enabled. No indicates it is disabled.
Yes indicates the unit is connected. No indicates it is not
connected.
Time in seconds when the current subscription expires.
After the subscription expires, the Cisco Attendant Console
automatically requests a new subscription.
5
60