Enable Circle With Disney Using The Nighthawk App; Enable Circle With Disney Using The Circle App - NETGEAR Nighthawk RS400 User Manual

Nighthawk AC2300 Cybersecurity WiFi Router Model RS400

Enable Circle with Disney using the Nighthawk app

Before enabling Circle, make sure that your router is in router mode (which is the default
mode). Your router must be in router mode to work with Circle. You can't enable Circle
if your router is in access point (AP) mode or bridge mode.
To enable Circle with Disney using the Nighthawk app:
1. Launch the Nighthawk app.
The dashboard displays.
2. Tap Parental Controls.
The Parental Control page displays.
3. Move the Enable Circle slider to the right to enable Circle with Disney.
4. Tap the Download and Install Circle App button.
5. Download the Circle app.
You must use the Circle app to finish setting up your Circle account.
6. Launch the Circle app and follow the prompts.

Enable Circle with Disney using the Circle app

Before enabling Circle, make sure that your router is in router mode (which is the default
mode). Your router must be in router mode to work with Circle. You can't enable Circle
if your router is in access point (AP) mode or bridge mode.
If your router is not running the latest firmware, the Circle app checks your router's
firmware and updates the firmware for you.
To enable Circle with Disney using the Circle app:
1. Make sure that your mobile device is connected to your router's network.
2. Download the Circle app on your mobile device.
3. Launch the Circle app.
4. Follow the prompts to set up Circle.
Control Access to the Internet 50 User Manual