NETGEAR Nighthawk RS400 User Manual page 91

Nighthawk AC2300 Cybersecurity WiFi Router Model RS400
To set up WPA and WPA2 enterprise security:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Setup page displays.
5. In the Wireless Network (2.4GHz b/g/n) section or the Wireless Network (5GHz a/n/ac)
section, select the WPA/WPA2 Enterprise Security Options radio button.
The page displays the WPA/WPA2 Enterprise section.
6. Enter the following settings:
• Encryption mode. From the Encryption Mode menu, select the enterprise mode:
- WPA [TKIP] +WPA2 [AES]. This type of security enables WiFi devices that
support either WPA or WPA2 to join the router's WiFi network. This is the
default mode.
- WPA2 [AES].WPA2 provides a secure connection but some older WiFi devices
do not detect WPA2 and support only WPA. If your network includes such
older devices, select WPA [TKIP] + WPA2 [AES] security.
• Group Key Update Interval. Enter the interval in seconds after which the RADIUS
group key is updated. The default interval is 3600 seconds.
• RADIUS server IP Address. Enter the IPv4 address of the RADIUS server to which
the WiFi network can connect.
• RADIUS server Port. Enter the number of the port on the router that is used to
access the RADIUS server for authentication. The default port number is 1812.
• RADIUS server Shared Secret. Enter the shared secret (RADIUS password) that
is used between the router and the RADIUS server during authentication of a
WiFi user.
7. Click the Apply button.
Your settings are saved.
Manage the WiFi Network
Settings
91 User Manual