Manage Advanced Wifi Settings - NETGEAR Nighthawk RS400 User Manual

Nighthawk AC2300 Cybersecurity WiFi Router Model RS400
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Wireless Settings page displays.
5. Scroll down below the WPS Settings section and select or clear the Enable MU-MIMO
check box.
Selecting this check box enables MU-MIMO. Clearing this check box disables
MU-MIMO.
6. Click the Apply button.
Your settings are saved.
If you connected over WiFi to the network, you are disconnected from the network
and must reconnect.

Manage advanced WiFi settings

For most WiFi networks, the advanced WiFi settings work fine and you do not need to
change the settings.
Note: If your computer is connected with WiFi when you change the WiFi settings, you
are disconnected when you click the Apply button. To avoid this problem, use a computer
with a wired connection to access the router.
To manage the advanced WiFi settings:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Advanced Wireless Settings.
The Wireless Settings page displays.
5. Change the settings for 2.4 GHz or 5 GHz WiFi network.
Manage the WiFi Network
Settings
104 User Manual