Rear Panel - NETGEAR Nighthawk RS400 User Manual

Nighthawk AC2300 Cybersecurity WiFi Router Model RS400
Table 1. LED and button descriptions (Continued)
LEDs and Buttons Descriptions
LAN ports 1–4 The LED color indicates the speed: white for Gigabit Ethernet connections and amber for
100 Mbps or 10 Mbps Ethernet connections.
Solid white or solid amber. A powered-on device is connected to the Ethernet port.
Blinking white or blinking amber. The port is sending or receiving traffic.
Off. No device is connected to this Ethernet port.
WiFi On/Off button Pressing this button for two seconds turns the 2.4 GHz and 5 GHz WiFi radios on and off.
with LED If this LED is solid white, the WiFi radios are on. If this LED is off, the WiFi radios are turned
off and you cannot use WiFi to connect to the router.
WPS button with LED This button lets you use WPS to join the WiFi network without typing the WiFi password.
The WPS LED blinks white during this process and then lights solid white.

Rear panel

The following figure shows the rear panel connectors and buttons.
Figure 2. Router rear panel
Hardware Setup 12 User Manual