Return The Router To Router Mode; Set Up A Bridge For A Port Group Or Vlan Tag Group - NETGEAR Nighthawk RS400 User Manual

Nighthawk AC2300 Cybersecurity WiFi Router Model RS400

Return the router to router mode

By default, your router is set to router mode. If you changed the mode to access point
mode or bridge mode, you can change the mode back to router mode.
To set up router mode:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Router/ AP / Bridge Mode.
The Router / AP / Bridge Mode page displays.
5. Select Router Mode.
The page adjusts.
6. Click the Apply button.
Your settings are saved.
Set up a bridge for a port group or VLAN tag
group
Some devices, such as an IPTV, cannot function behind the router's network address
translation (NAT) service or firewall. Based on what your Internet service provider (ISP)
requires, for the device to connect to the ISP's network directly, you can enable the
bridge between the device and the router's Internet port or add new VLAN tag groups
to the bridge.
Note: If your ISP provides instructions for how to set up a bridge for IPTV and Internet
service, follow those instruction.
Manage Network Settings 78 User Manual