Enable Circle With Disney Using The Circle App - NETGEAR Nighthawk R7000P User Manual

5. Update your router's firmware.
For more information, see
The enable Circle with Disney page displays after the firmware is updated.
6. Click the ENABLE button.
The Parental Controls page displays.
7. Move the slider to the right to enable Circle with Disney.
Note You can only enable one parental controls service.
8. Click the Apply button.
The links to download the Circle app displays.
9. Download the Circle app on your mobile device.
10. Launch the Circle app and tap the LET'S GO button.
The Account Details page displays.
11. Complete the fields on the Account Details page and tap the CONTINUE button.
The Add Phone Number page displays.
12. Enter your cell phone number and tap the SEND CODE button.
A code is sent to the cell phone number that you provided.
13. Enter the code that was sent to your cell phone.
The Circle app verifies the code.
14. Tap the AWESOME button.
15. Select a subscription plan and follow the onscreen instructions to set up your preferences.
Circle with Disney is enabled on your NETGEAR router.

Enable Circle With Disney Using the Circle App

Before enabling Circle, make sure that your router is in router mode. Your router must be in router mode to
work with Circle. You can't enable Circle if your router is in access point (AP) mode or bridge mode. For
more information, see Enable Router Mode
If your router is not running the latest firmware, the Circle app checks your router's firmware and updates
the firmware for you.
To enable Circle with Disney using the Circle app:
1. Make sure that your mobile device is connected to your router's network.
2. Download the Circle app on your mobile device.
3. Launch the Circle app.
4. Follow the prompts to set up Circle.
Nighthawk AC2300 Smart WiFi Router
Update the Router Firmware
on page 64.
Control Access to the Internet
40
on page 79.