Making A Mobile Phone Call Using Your Cisco Spa 525G2 - Cisco SPA 525G User Manual

Using Advanced Phone Features
Using the Cisco SPA 525G2 With Your Bluetooth-Enabled Mobile Phone
NOTE
STEP 1
STEP 2
NOTE
Cisco Small Business IP Phone SPA 525G/SPA 525G2 User Guide (SPCP)

Making a Mobile Phone Call Using Your Cisco SPA 525G2

When you make a mobile phone call using your Cisco SPA 525G2, your Cisco SPA
525G2 acts as a handsfree device for your phone. The call is made through your
mobile phone, but the audio is present on the Cisco SPA 525G2 and the call
control is done using the Cisco SPA 525G2, unless you switch back to your mobile
phone. (See "Switching Audio from Your Cisco SPA 525G2 to Your Mobile
Phone" section on page
Not all mobile phones support this function. See the list of Bluetooth-enabled
mobile phones supported with the Cisco SPA 525G2 that is posted at the Cisco
support community at http://www.cisco.com/go/smallbizsupport, and also consult
the latest Cisco SPA 525G2 release notes available at cisco.com.
Press the line button associated with your mobile phone (the line button is marked
with a mobile phone icon with a flashing lightning bolt).
Do one of the following:
• Enter a number to dial and press the Dial softkey.
• Press the Directory softkey and select Personal Address book. Choose a
number and press the Dial softkey.
• Scroll to select a recently-called number and press the Select button.
If you usually enter a digit before dialing (such as 9 to reach an outside line),
remember that this call is made through your mobile phone. You should follow the
usual practice for making calls on your mobile phone (for example, you probably do
not dial a digit to reach an outside line on your mobile phone).
64.)
4
61