Making A Mobile Call From Your Cisco Spa 525G2 - Cisco SPA 525G2 User Manual

Making a mobile call from your Cisco SPA 525G2

When you make a mobile phone call using your Cisco SPA 525G2, your Cisco SPA
525G2 acts as a handsfree device for your phone. The call is made through your mobile phone, but the
audio is present on the Cisco SPA 525G2 and the call control is done using the Cisco SPA 525G2, unless
you switch back to your mobile phone.
Note: Not all mobile phones support this function. See the list of Bluetooth-enabled mobile phones
supported with the Cisco SPA 525G2 that is posted at the Cisco support community at
http://www.cisco.com/go/smallbizsupport, and also consult the latest Cisco SPA 525G2 release
notes available at cisco.com.
1. Press the line button associated with your mobile phone (the line button is marked with a mobile
phone icon with a flashing lightning bolt).
2. Do one of the following:
o Enter a number to dial and press the 'Dial' softkey
o Press the 'Directory' softkey and select 'Personal Address Book'. Choose a number and
press the 'Dial' softkey
o Select 'Redial', then scroll to select a recently-called number and press the 'Select' button
Note: If you usually enter a digit before dialing (such as 9 to reach an outside line), remember that this
call is made through your mobile phone. You should follow the usual practice for making calls on
your mobile phone (for example, you probably do
mobile phone).
The outgoing call appears on both your Cisco SPA 525G2 and your mobile phone display. The Cisco SPA
525G2 displays an off-hook icon next to the mobile phone display name.
Version 1.5
not dial a digit to reach an outside line on your
36 of 47