Cisco SPA 525G User Manual page 33

Unified communications manager express for the cisco small business ip phone (spcp)

Hide thumbs Also See for SPA 525G:

Table of Contents

Installing Your Phone

Connecting Your Phone to the Computer Network

STEP 1

STEP 2

STEP 3

STEP 4

STEP 5

STEP 6

Cisco Small Business IP Phone SPA 525G/SPA 525G2 (SPCP) User Guide

The following example shows WPA information for a Linksys WRT160N router:

To set up the Cisco SPA 525G/525G2 wireless connection:

If you have plugged in an Ethernet cable to connect the phone to the wired

network, remove it and reboot the phone. If an Ethernet connection is present on

the phone, it is used instead of the Wi-Fi connection.

Press the Setup button on your phone.

Scroll to Network Configuration and press the Select button.

In the Wi-Fi field, press the Left or Right Arrow key to turn Wi-Fi

softkey button.

Scroll to Wi-Fi Configuration and press the Right Arrow key.

Choose one of the following options:

•

Wireless Profile—Use this option to add a new wireless profile (either

manually or by scanning for available networks), edit an existing wireless

profile, or connect to a previously configured network. See

Adding a Wireless Profile on the Cisco SPA 525G/525G2, page

. Press the Save

Manually

32.

Table of Contents

Small business spa525g2