Using The Cisco Spa 500S - Cisco SPA 525G User Manual

Using the Cisco SPA 500S Attendant Console

Using the Cisco SPA 500S

NOTE
Using the Cisco SPA 500S
Cisco Small Business IP Phone SPA 525G/SPA 525G2 User Guide (SPCP)
The options available on the Cisco SPA 500S depend on the phone system
configuration. Your phone system might not provide all of the features mentioned in
this document.
Configuration of the Cisco SPA 500S and assignment of the line buttons is
performed by the phone administrator and is not described in this document.
The functions of Cisco SPA 500S buttons may differ depending on configuration.
However, in general, you can:
• Monitor an extension by viewing its color. The LED color of a line button
gives you information about the line being monitored:
- Green: The line is idle.
- Red (steady): The line is in use.
- Red (blinking): The line is ringing.
- Orange (steady): The line is not registered; there is a problem with phone
connectivity.
- Orange (blinking): The line is not configured properly.
- Off: The line is not configured.
• Transfer a call by pressing the line button on the Cisco SPA 500S when an
incoming call is ringing.
• Dial a configured extension by pressing the green line button on the Cisco
SPA 500S.
• Pick up a call ringing at the extension by pressing the flashing red line
button.
5
83