Exporting Or Deleting Qal3 Data - ABB EL3060 Series Operating Instruction

114

Exporting or deleting QAL3 data

Exporting QAL3 data
Deleting QAL3 data
EL3060 CONTINUOUS GAS ANALYZERS
The QAL3 data can be exported from the gas analyzer for archiving or pro-
cessing in e.g. a spread-sheet program.
1 Click "QAL3 Monitoring" on the QAL3 monitoring home page.
2 Select the type of display on the "QAL3 Monitoring" page:
"Zero point simple"
•
"Reference point simple",
•
"Zero point details"
•
"Reference point details".
•
3 Select the type of control chart (see page 108) ("Control Chart to Dis-
play") for the desired sample component.
4 Click "Export data" at the end of the page.
The QAL3 data of the displayed control chart is exported to a text file
(.txt).
5 Open the text file or store it (if required, under a new name).
6 If required, repeat steps 2 to 5 for further control charts.
1 Click "QAL3 Monitoring" on the QAL3 monitoring home page.
2 Click "Settings" on the "QAL3 Monitoring" page.
3 Click "Delete all data" in the "Data storage" window:
The following warning is displayed:
"Are you sure you want to delete all data? This operation cannot be un-
done. Ensure that all data has been exported before you continue."
4 Click "OK". The QAL3 data is deleted.
5 Exit the page by clicking "Save" or "Cancel".
| OI/EL3060-EN REV. A