Configuring The Language Of The User Interface - ABB EL3060 Series Operating Instruction

Configuring the language of the user interface

Uploading the language file to the gas analyzer
EL3060 CONTINUOUS GAS ANALYZERS
Prerequisites: The ECT software tool ("configurator") has been installed on
the computer and the current language files are stored in the folder
"Analyze IT" – "ECT" – "Languages".
1 Open the ECT software tool.
2 Click the command "Communication Properties..." in the "Options"
menu or click the icon
3 Enter either the network name (server name) or the IP address of the
gas analyzer in the "Communication Properties" dialog.
4 Close the dialog by clicking "OK".
| OI/EL3060-EN REV. A
in the toolbar.
99