Configure Audio Settings; Configure The User Access Control; Enable And Configure The Phone Web Server; Configure The Web Server From The Phone Web Interface - Cisco 8831 Administration Manual

Configure Audio Settings

Configure Audio Settings
You can configure default audio settings for the phone. The volume settings can be modified by the user
by pressing the volume control button on the phone, then pressing the Save soft button.
To configure the audio volume settings:
Click Admin Login > advanced > Voice > User.
Step 1
In the Audio Volume section, configure a volume level between 1 and 10, with 1 being the lowest level:
Step 2
Parameter
Ringer Volume
Speaker Volume
Click Submit All Changes.
Step 3

Configure the User Access Control

Only the user access attribute "ua" is respected by the conference phone device. For a specific parameter,
the "ua" attribute defines access by the user account to the administration web server. If "ua" attribute
is not specified, the factory default user access is applied for the corresponding parameter. Access by the
Admin account is unaffected by this attribute.
The value of the element attributes must be enclosed by double quotes.
Note
The "ua" attribute must have one of the following values:
•
•
•

Enable and Configure the Phone Web Server

The web server allows administrators and users to log in to the phone by using a phone web user
interface. Administrators and users have different privileges and see different options for the phone
based on their role.

Configure the Web Server from the Phone Web Interface

To enable the web server:
Click Admin Login > advanced > System.
Step 1
Cisco Unified IP Conference Phone 8831 for Third-Party Call Control Administration Guide
2-6
na – no access
ro – read-only
rw – read/write
Description
Sets the volume for the ringer.
Sets the volume for the full-duplex speakerphone.
Chapter 2 Customize Standard Features