Cisco 8831 Administration Manual page 85

Appendix A Cisco Unified IP Conference Phone 8831 for Third-Party Call Control Field Reference
Parameter
Network Startup Delay
VLAN ID
Inventory Settings
Parameter
Asset ID
SIP
SIP Parameters
Parameter
Max Forward
Max Redirection
SIP User Agent Name
SIP Server Name
Description
Setting this value causes a delay for the switch to get to the
forwarding state before the phone will send out the first
LLDP-MED packet. The default delay is 3 seconds. For
configuration of some switches, you might need to increase
this value to a higher value for LLDP-MED to work.
Configuring a delay can be important for networks that use
Spanning Tree Protocol.
If you use a VLAN without CDP (VLAN enabled and CDP
disabled), enter a VLAN ID for the IP phone. Note that only
voice packets are tagged with the VLAN ID. Do not use 1 for
the VLAN ID.
Description
Provides the ability to enter an asset ID for inventory
management when using LLDP-MED. The default value for
Asset ID is empty. Enter a string of less than 32 characters if
you are using this field.
The Asset ID can be provisioned only by using the web
management interface or remote provisioning. The Asset ID is
not displayed on the phone screen.
Changing the Asset ID field causes the phone to reboot.
Description
SIP Max Forward value, which can range from 1 to 255.
Defaults to 70.
Number of times an invite can be redirected to avoid an
infinite loop.
Defaults to 5.
Used in outbound REGISTER requests.
Defaults to $VERSION. If empty, the header is not included.
Macro expansion of $A to $D corresponding to GPP_A to
GPP_D allowed
Server header used in responses to inbound responses.
Defaults to $VERSION.
Cisco Unified IP Conference Phone 8831 for Third-Party Call Control Administration Guide
Voice
A-11