Cisco 8831 Administration Manual page 62

About Dial Plan
Digit Sequence
[sequence]
.
(period)
<dialed:substituted>
,
(comma)
!
(exclamation point)
*xx
S0 or L0
P
Cisco Unified IP Conference Phone 8831 for Third-Party Call Control Administration Guide
6-2
Function
Characters within square brackets create a list of accepted key presses.
The user can press any one of the keys in the list.
A numeric range, for example,
digit from through .
2 9
A numeric range can include other characters. For example,
allows a user to press 3, 5, 6, 7, 8, or *.
A period indicates element repetition. The dial plan accepts
entries of the digit. For example,
0111, and so forth.
This format indicates that certain dialed digits are replaced by the
substituted characters when the sequence is transmitted. The dialed
digits can be zero to 9. For example:
<8:1650>xxxxxxx
When the user presses followed by a seven-digit number, the system
8
automatically replaces the dialed
dials 85550112, the system transmits 16505550112.
If the dialed parameter is empty and there is a value in the substituted
field, no digits are replaced and the substituted value is always
prepended to the transmitted string. For example:
<:1>xxxxxxxxxx
When the user dials 9725550112, the number
beginning of the sequence; the system transmits 19725550112.
An intersequence tone played (and placed) between digits plays an
outside line dial tone. For example:
9, 1xxxxxxxxxx
An outside line dial tone is sounded after the user presses
continues until the user presses
Prohibits a dial sequence pattern. For example:
1900xxxxxxx!
Rejects any 11-digit sequence that begins with 1900.
Allows a user to enter a 2-digit star code.
For Interdigit Timer Master Override, enter
inter-digit timer to 0 seconds, or enter
timer to 0 seconds.
To pause, enter , the number of seconds to pause, and a space. This
P
feature is typically used for implementation of a hot line and warm line,
with a 0 delay for the hot line and a non-zero delay for a warm line. For
example:
EXAMPLE: P5
A pause of 5 seconds is introduced.
Chapter 6 Configure Dial Plan
allows a user to press any one
[2-9]
allows users to enter 0, 01, 011,
01.
with the sequence
8 1650
is added at the
1
.
1
to reduce the short
S0
to reduce the long inter-digit
L0
[35-8*]
or more
0
. If the user
. The tone
9