Cisco 8831 Administration Manual page 18

Configure Phone Information and Display Settings
To configure a custom logo:
Click Admin Login > advanced > Voice > Phone.
Step 1
To display a text logo, in the Text Logo field enter text as follows:
•
•
•
•
To display a picture logo:
Step 2
a.
b.
Step 3 Click Submit All Changes. The phone reboots, retrieves the .png file, and displays the picture when it
next boots.
Note The phone image file types supported are:
•
Change the Display Background Picture
You can use a picture to customize the background on the phone screen.
When the PNG Picture Download URL is changed, the phone compares the URL to the previous image
URL. (If the URLs are the same, the phone does not perform the download.) If the URLs are different,
the phone downloads the new image and displays it (providing the Select Background Picture field is set
to PNG Picture).
The phone does not reboot after you change the background image URL.
A background image is displayed while the phone is running. To display a logo during the phone boot
sequence.
Copy the image to a TFTP or HTTP server that is accessible from the phone.
Step 1
Step 2 Click Admin Login > advanced > Voice > Phone.
Step 3 Select the background picture in the Select Background Picture menu:
•
Cisco Unified IP Conference Phone 8831 for Third-Party Call Control Administration Guide
2-2
Up to two lines of text
Each line must be less than 32 characters
Insert a new line character (\n) and escape code (%0a) between the two lines
For example,
Super\n%0aTelecom
Super
Telecom
Use the + character to add spaces for formatting. You can add multiple + characters before and after
the text to center it.
In the PNG Picture Download URL field, enter the path, for example:
http://192.168.2.244/pictures/image04_128x48.png
(you can also use a TFTP server)
Change Select Logo to PNG Picture.
Bitmap format, 1 bit-per-pixel color, size 128-by-48 pixels.
None–Does not display a background picture.
displays:
Chapter 2 Customize Standard Features