Table of Contents
Advertisement
Safety
2.7.2 Tools
WARNING!
Treat the flange surface of the cover and the housing
with care. Keep the flange surface free of dirt.
The O-ring must be present and undamaged.
WARNING!
Use non-sparking tools and explosion-proof testers. Use
suitable explosion-proof tools (e.g. testing devices)!
2.7.3 Working Environment
2.7.3.1 Hazardous Zone
WARNING!
POTENTIAL ELECTROSTATIC CHARGING HAZARD
• Avoid generation of static electricity.
• In case a OneWireless SmartRadar FlexLine is
installed, do NOT wipe the surface of the antenna with
dry cloth, and do NOT clean its surface with a solvent.
If electrostatically charged, discharge of the antenna
surface to a person or a tool could ignite a surrounding
hazardous atmosphere.
2.7.3.2 Safe Zone
WARNING!
Make sure that no explosive gas mixtures build up in the
working area.
Installation Guide
8
SmartRadar FlexLine
Part No.: 4417.760_Rev06
Advertisement
Table of Contents
