Installation
FIG. 4-8 Terminal labelling
4.11.2.4 General Procedure
Connect the wiring to the terminals with the numbers as
shown in the tables in the following sections.
4.11.3 Non-intrinsically Safe Connections
The non-intrinsically safe connections are connected to the grey
wiring terminal.
If local and or national regulations allow, the power supply, Enraf
fieldbus, and hardware relay outputs may be combined into one,
unshielded, cable.
A separate cable may also be used for each.
4.11.3.1 Power Supply
Connect the power supply to either:
• DC: 24 - 65 Volt
• AC: 65 - 240 Volt
Installation Guide
32
SmartRadar FlexLine
Part No.: 4417.760_Rev06