Table of Contents
Advertisement
Installation
4.11.3.4 Host Communication EIA 232
Cable specifications
Type
Maximum length
Label
08. 232RX
09. 232TX
10. GND_ISO
4.11.3.4.1 Topology
EIA
communication. One gauge can be connected per host.
FIG. 4-10 EIA 232 topology
4.11.3.5 Hardware Relay Outputs (FII-DO)
The hardware relay outputs can be used as an alarm signal or to
operate a remote device.
The signals corresponding with the terminal labels are
programmed during commissioning.
Cable specifications
Type
Part No.: 4417.760_Rev06
Shielded
15 meter
Parameters
38k4/19k2/9k6/4k8/2k4/1k2 bps
Selection by software
232
Host
communication
10. GND_ISO
08. 232RX
09. 232TX
Approved for use in hazardous areas and suitable for the specified
power rating.
SmartRadar FlexLine
is
for
EIA 232 Field Bus
point-to-point
Installation Guide
35
Advertisement
Table of Contents
