And Approvals; Intended County Usage; Certifications And Approvals; Radio Module Specifications - Honeywell Limitless WMPR Series Installation And Technical Manual

Installation and Technical Manual for the
Limitless™ Multi-Protocol Receiver, WMPR Series
2 | SPECIFICATIONS,
CERTIFICATIONS, AND APPROVALS
2.1 | Intended Country Usage
Table 3. North America; Country Code Use "A"
Country ISO 3166 2 letter code
UNITED STATES US
CANADA CA
Table 4. Asia Pacific; Country Code Use "B"
Country ISO 3166 2 letter code
AUSTRALIA AU
, ATTENTION
Contact Honeywell before use of the WMPR in countries not
listed in Tables 3 and 4.

2.2 | Certifications and Approvals

See product labels for applicable approvals and ratings.

Table 5. Communication Approvals and Standards

Approval/Item
Enclosure type
Federal Communications Commission
(FCC)
Industry Canada (IC)
Australian Communications and
Media Authority (ACMA)
EtherNet/IP™
General purpose discrete I/O
(GEN code Version 1 only)
m WARNING
The WMPR must be installed in accordance with the
requirements specified in this document in order to
comply with the specific Country Communication Agency
requirements. (i.e. FCC, IC, ACMA, etc.) See Section 3 as it
requires choosing the correct Country Use Code and thus
allowable antenna and/or cable usage.

2.3 | Radio Module Specifications

Table 6. Radio Module Specifications

Ratings/Descrip-
tion
IP20
FCC Part 15.247:

2.4 | Electrical Specifications

2014

Table 7. Electrical Specifications

Canadian RSS-210:
2010
C-Tick mark
ODVA conformant™
m WARNING
• The cable length of the customer-supplied dc power
source to the WMPR supply terminals cannot exceed
three (3) meters.
• The WMPR must be used indoors.
• The WMPR must be used inside a cabinet and can only
be accessed during set-up or maintenance.
Item Specification
Radio module Honeywell RF-PCBa
WPAN IEEE 802.15.4 Direct Se-
Wireless standard quence Spread Spectrum (DSSS), 2.4
GHz
Data rate 250 kbps
Operating
ISM 2.4 GHz
frequency
Country use code "A"
Power level, 11 dBm
Module transmit
power
Country use code "B"
Power level, 6 dBm
Receive sensitivity
-100 dBm
(typ.)
Up to 14 Limitless™ inputs can be
# of pairing (max.)
paired to a single WMPR
Item Specification
Supply voltage 10 Vdc to 30 Vdc
Supply current 500 mA max.
Output type EtherNet/IP™
Termination Cage-clamp connector block
m WARNING
The cable length of the customer-supplied dc power source
to the WMPR's supply terminals cannot exceed three (3)
meters.
ISSUE B
32309669
Sensing and Internet of Things
5