Factory Reset Receiver Mode, Gen 1; Figure 39. Node Lcd Time - Time Displayed; Figure 40. Node Lcd Time - Updated Lcd Time; Figure 41. Factory Reset Mode - Honeywell Limitless WMPR Series Installation And Technical Manual

Multi-protocol receiver

Table of Contents

Installation and Technical Manual for the

Limitless™ Multi-Protocol Receiver, WMPR Series

You can then scroll "Up" or "Down" to the desired LCD Time and

touch "Start" to initiate the change in LCD Time which will lead

to the display in Figure 40 momentarily before returning to the

previous screen display with the updated LCD Time; Figure 39:

Figure 39. Node LCD Time - LCD Time Displayed (i.e.,

0%)

Figure 40. Node LCD Time - Updated LCD Time Dis-

played (i.e., 5s, Off 5s)

Note: If the particular Node # that you are trying to update does

not have an LCD display, the screen will display "Node LCD

N/A".

6.12 | Factory Reset Receiver Mode, GEN

code Version 1 ONLY

Figure 41. Factory Reset Receiver Mode

NOTICE: When a Factory Reset Receiver is performed, a factory

reset should also be performed on all functioning switches and

sensors that were paired to the WMPR. See "Restore to Factory

Defaults" in the WPS Installation and Technical Manual and

"Purge Mode" in the specific switch series' Installation and

Technical Manual.

The Factory Reset Mode (see Figure 41) can be accessed by

touching the "FACTORY RESET RCVR" function button as dis-

played in the Configuration Menu (see Figure 21). The Factory

Reset Mode will purge all nodes from the WMPR and reset to

Factory settings. Touching the "Start" function button will initi-

ate the Factory Reset process and lead to the display in Figure

42 momentarily before displaying the Receiver information;

Figure 43:

Figure 42. Reset of Receiver In-Process

You must touch the "HOME" function button to return to the

CONFIGURATION MENU.

ISSUE B

32309669

Sensing and Internet of Things

Table of Contents