Table of Contents
Advertisement
Installation and Technical Manual for the
Limitless™ Multi-Protocol Receiver, WMPR Series
6.7 | Receiver Detail
Figure 22. Receiver Detail Menu
The RECEIVER DETAIL (see Figure 22) can be accessed by
touching the "RECEIVER DETAIL" function button as displayed
in the Action Menu (see Figure 15). Once you are in the RE-
CEIVER DETAIL you can choose between several different
modes.
A description of the modes are as follows:
CHANNEL: The Channel displays which channel in the 2.4
MHz range that the WMPR is operating at.
PAN ID: The PAN ID displays the Personal Area Network identi-
fication number assigned to the WMPR.
RECEIVER INFO: The Receiver Information contains the fol-
lowing detail about the WMPR (see Figure 23).
Table 18. Receiver Detail Display & Indication, Screen 1
Display
Indication
P/N
Part Number of WMPR
Radio FW Rev
Firmware version in WMPR radio
Transmit
Transmit power of the WMPR:
power
North America = 11 dBm; International = 6
(Power level
dBm
setting)
MAC
MAC ID of WMPR radio
Figure 23. Receiver Information, Screen 1
Table 19. Receiver Information, Screen 2
Display
Indication
WMPR REV
Firmware version of WMPR main processor
IP Address
Internet Protocol address
Enternet IP/
EtherNet/IP™ Media Access Control ad-
MAC ID
dress
Figure 24. Receiver Information, Screen 2
6.8 | Pair Mode
Figure 25. Pair Mode
The PAIR MODE (see Figure 25) can be accessed by touching
the "PAIR" function button as displayed in the Configuration
Menu (see Figure 20). Once you are in the PAIR MODE you can
choose any of the 14 node numbers to pair by scrolling "Up" or
"Down" to the desired Node number. The screen will display the
next sequential Node# available to Pair and if a chosen node
has already been paired the screen will display "Node Paired".
Follow the Pairing Procedure below to properly Pair a Node to
the WMPR:
ISSUE B
32309669
Sensing and Internet of Things
17
Advertisement
Table of Contents
