Table of Contents
Advertisement
Installation and Technical Manual for the
Limitless™ Multi-Protocol Receiver, WMPR Series
Figure 8. System Start Up
EtherNet/MAC ID screen appears (see Figure 9). (Record the
MAC ID, IP Address, and then touch the "Next" function button
to move to the Main Menu) (see Figure 10).
Figure 9. EtherNet/IP™ MAC ID & IP Address
Figure 10. Main Menu
, ATTENTION
If there are multiple WMPRs being used in the application,
apply power to previously paired WMPRs first (if any) and
then to one WMPR at a time. Allow time for each WMPR to
complete its start-up sequence before applying power
to the next WMPR. There is a maximum of five WMPRs
that can be used in the same localized area. Contact
Honeywell Application Engineering at 800-537-6945 if
more than five WMPRs are desired to be used in the same
localized area.
6.2 | Main Menu
6.2.1 | Menu Status
The Main Menu (see Figure 11) allows you to see the status "at-
a-glance" of the EtherNet/IP™ connection and information of
ALL the Nodes currently paired to the WMPR. It also allows you
to choose the "Node Status" menu for quick access to further
information about each node or "Actions" that routes you to
several other different modes.
Figure 11. Main Menu
6.2.2 | EtherNet/IP™ Connection
EtherNet/IP™ connection: The Main Menu display will in-
dicate "Ethernet Lost" (see Figure 12) if the connection is not
allowing a good signal to reach the WMPR; no indication means
the connection is good.
Figure 12. Main Menu - Ethernet Lost
ISSUE B
32309669
Sensing and Internet of Things
13
Advertisement
Table of Contents
