Table of Contents
Advertisement
Installation and Technical Manual for the
Limitless™ Multi-Protocol Receiver, WMPR Series
6.13 | Factory Reset Receiver Mode, GEN
code Version 2 ONLY
Figure 44. Factory Reset Receiver Mode, GEN code
Version 2 ONLY
6.13.1 | Reset All Nodes from WMPR
NOTICE: When a Factory Reset Receiver is performed, a factory
reset should also be performed on all functioning switches and
sensors that were paired to the WMPR. See "Restore Factory
Defaults" in the WPS Installation and Technical Manual and
"Purge Mode" in the specific switch series' Installation and
Technical Manual.
The Factory Reset Mode (see Figure 44) can be accessed by
touching the "FACTORY RESET RCVR" function button as dis-
played in the Configuration Menu (see Figure 21). The Factory
Reset Model will purge all nodes from the WMPR and reset to
Factory settings. Touching the "Start" function button will initi-
ate the Factory Reset process and lead to the display in Figure
45 momentarily before displaying the Receiver information;
Figure 46.
22 sensing.honeywell.com
6.13.2 | Turn On the DHCP
The Factory Reset Mode (see Figure 44) can be accessed by
touching the FACTORY RESET RCVR function button as dis-
played in the Configuration Menu (see Figure 21). Touching the
"Turn on DHCP" will initiate requiring a DHCP server and lead to
the display in Figure 21; Configuration Menu.
6.13.3 | Turn Off the DHCP
The Factory Reset Mode (see Figure 44) can be accessed by
touching the FACTORY RESET RCVR function button as dis-
played in the Configuration Menu (see Figure 21). Touching the
"Turn off DHCP" will initiate not requiring a DHCP server and
lead to the display in Figure 21; Configuration Menu. The IP
address will now be static (permanently assigned) to what was
originally displayed in Figure 5. You can view the IP address
via the RECEIVER INFO screen found in the RECEIVER DETAIL
menu; Figure 22.
ISSUE B
32309669
Advertisement
Table of Contents
