Table of Contents
Advertisement
Limitless™ WDRR Receiver
2.2
Certification and Approvals
See the product label for applicable approvals and ratings.
Table 7 – Approvals and Ratings
Approval/Item
Enclosure type
Federal Communications Commission (FCC)
Industry Canada (IC)
European Telecommunications Standards Institute (ETSI)
Australian Communications and Media Authority (ACMA)
Comision Federal de Telecomunicaciones (COFETEL)
Wireless Planning & Coordination (WPC)
WARNING
* The WDRR must be installed in accordance with the requirements specified in this document in order
to comply with the specific Country Communication Agency requirements. (i.e. FCC, IC, ETSI, ACMA,
etc.) See Section 3 as it requires choosing the correct Country Use Code and thus allowable antenna
and/or cable usage.
2.3
Radio Module Specifications
Table 8 – Radio Module Specifications
Item
Radio module
Wireless standard
Data rate
Operating frequency
Module transmit power
(max.)
Receive sensitivity (typ.)
# of pairing (max.)
2.4
Electrical Specifications
Table 9 – Electrical Specifications
Item
Supply voltage
Supply current
Output type
Output voltage
Load current
Leakage current
Voltage drop
Termination
Specification
Digi International XBee –PRO
WPAN IEEE 802.15.4 Direct Sequence Spread Spectrum (DSSS), 2.4 GHz
250 kbps
ISM 2.4 GHz
Country code "A": 20 dBm
Country code "B": 8 dBm
-100 dBm
Up to 14 Limitless™ inputs can be paired to a single WDRR
Specification
10 Vdc to 28 Vdc
500 mA max.
NPN current sinking, open collector or NPN "totem pole";
PNP current sourcing open collector or PNP "totem" pole
Supply voltage minus 1.4 Vdc
10 mA max.
100 uA max.
2.0 Vdc max. @ max. load @ 25 °C [77 °F]
Cage-clamp screw terminal blocks
Ratings/Description
IP20
FCC Part 15.247
Canadian ICES-003
CE mark
C-Tick mark
Mexico RCPDIXBIO-1147
India 1001/2011/WLRO-006
®
Honeywell Sensing and Control
50063987
Issue 1,
5
Hide quick links:
Advertisement
Table of Contents
