Hms Mib Specifications; Scte-Hms-Property-Mib - Cisco GS7000 Installation And Configuration Manual

HMS MIB Specifications

SCTE-HMS-PROPERTY-MIB

The Property MIB consists of the following tables:

analog properties table

discrete alarms table

current alarms table
Note: Information contained in the current alarms table can be determined by
studying the other Property MIB tables.
Analog Property Table
The analog property table allows you to adjust certain alarm thresholds, hysteresis
values, and settings with respect to alarm and trap generation. The thresholds
displayed by the property MIB fall into three categories.
1 Thresholds that cannot be changed (na and RO in the following table). These
parameters are informational and cannot be changed. Since the MIB itself has
read-write access, you can edit the table. However, if an edited value has read-
only access in the module, information coming from the module on the next
polling cycle will overwrite your edits for that particular setting.
2 Threshold values that represent alarm thresholds (Alarm). These are used to
generate a trap if the monitored value crosses one of these thresholds.
3 Thresholds that change the module settings. By editing the threshold on the
property MIB, you actually change switching or other thresholds set in the
module (Module threshold or Switching threshold).
Equipment
LinePowerVoltage
Transponder Core
RF Receive Level
Transmitter
Receiver
Power Supply
EDFA
EDFA
EDFA
EDFA
OL-29937-01
Parameter OID
fnLinePowerVoltage
commonInternalTemperature
commonForwardPathReceiveLevel
fnReturnLaserOpticalPower
fnOpticalReceiverPower
fnDCPowerVoltage
heOpAmpInputPower
heOpAmpLaserTemp
heOpAmpLaserBiasCurrent
heOpAmpLaserOutputPower

HMS MIB Specifications

Thresholds Changed
na
Alarm
Alarm
Module threshold
Switching threshold
na
Module threshold
na
Module threshold
Module threshold
Code
RO
RW
RW
RW
RW
RO
RW
RO
RW
RW
43