Cisco Proprietary Mib Specifications; Optical Transmitter Table - Cisco GS7000 Installation And Configuration Manual

Cisco Proprietary MIB Specifications

SA-HMS-GS7000-FIBERNODE-MIB is a proprietary MIB. The MIB supports the
following values for the Optical Hub Node and Optical Hub in saFn7000Member,
which has read-only access.
saFn7000Member
saFn7000Member OID 1.3.6.1.4.1.1429.1.6.5.2.1

Optical Transmitter Table

saFnReturnLaserTable consists of an index, saFnReturnLaserIndex, and
saFnReturnLaserSlot. saFnReturnLaserIndex uses legacy numbering conventions
for transmitters. The following table shows GS7000 Node numbering conventions
and slot numbers side-by-side.
Also, in previous versions of the GS7000 transponder core module, "mount" and
"unmount" could be set. With transponder core module image revision OHN_3.00.03
or greater, "mount" means that a transmitter is present and "unmount" means that a
transmitter is not installed. An attempt to change the value of this OID from "mount"
or "unmount" or vice-versa has no effect on the module.
saFnReturnLaserIndex
1
2
3
4
saFnReturnLaserIndex
saFnReturnLaserSlot
OL-29937-01
Description and Enumeration
deviceGS7000(2)
deviceGS7000opticalHubNode(8)
deviceGS7000opticalHub(9)
Slot Number
8
9
10
11
OID 1.3.6.1.4.1.1429.1.6.5.2.2.1.1
OID 1.3.6.1.4.1.1429.1.6.5.2.2.1.2

Cisco Proprietary MIB Specifications

Device Name
GS7000 Node
Hub Node
Optical Hub
Transmitter Transmitter Not
Installed Installed
mount(2) unmount(1)
mount(2) unmount(1)
mount(2) unmount(1)
mount(2) unmount(1)
39