Mib-2 Specifications; Mib-2 System Mib; Mib-2 Entity Mib - Cisco GS7000 Installation And Configuration Manual

Chapter 4 Management Via SNMP

MIB-2 Specifications

This section explains the following MIBs:

MIB-2 System MIB



MIB-2 Entity MIB


MIB-2 System MIB
The System MIB gives an overview for the transponder core. By default, sysContact,
sysName, and sysLocation can be changed. All three are saved in nonvolatile
memory.
Note: The transponder core does not have a Real Time Clock (RTC). Therefore,
sysUpTime is only a time estimate.
MIB-2 Entity MIB
The Entity MIB gives a configuration overview for the node or hub. Occupied slots
are represented in the entPhysicalTable. The index into the entPhysicalTable for the
Model GS7000 Node, GS7000 Optical Hub Node, and GS7000 Optical Hub is the slot
number, starting with slot 1 and continuing through slot 11, inclusive. Since there is
no slot 12 in the node or hub, entPhysicalIndex 12 represents the actual hub/node in
which all the modules are contained. In this section, only pertinent OIDs are
detailed.
The following table shows sample data from the entPhysicalTable.
ent-
Physical-
Index
1
2
6
7
8
10
11
36
Possible Slot entPhysicalDescr
Numbers
1 Power Supply
(Redundant)
2 Power Supply
(Primary)
3 through 6 Receiver
7 SM/LCM
8 through 11 Transmitter
3 through 6 GS7000 EDFA
8 through 11 Broadcast 17.0 dBm
3 through 6 GS7000 OPSW
8 through 11
entPhysical- entPhysical-
ModelName SoftwareRev
101 na
101 na
102 na
2100 3.00.03
103 na
3100 1.01.02
4100 1.01.00
OL-29937-01