Cisco GS7000 Installation And Configuration Manual page 30

Chapter 2 Installation
OIB SM/LCM connector for a Model GS7000 Node or Hub Node
OIB SM/LCM connector for a Model GS7000 Optical Hub
3 Tighten the SM/LCM module hold-down screws to secure the module in the lid.
Torque the screws from 25 to 30 in-lbs (2.8 to 3.4 Nm).
4 If other modules are added or removed, verify that power limits are not
exceeded. Refer to Node Power Limitations (on page 17) for a list of module
power consumption figures.
5 Before closing the housing, press and hold the Auto-Setup button until the Status
and Fault LEDs stay on solid to start the discovery process.
16 OL-29937-01