Mibs Used In The Optical Hub/Node - Cisco GS7000 Installation And Configuration Manual

MIBs Used in the Optical Hub/Node

MIBs used in the GS7000 Optical Hub Node and Optical Hub are listed in the
following table. A number of standard MIBs are added to the transponder core to
support the addition of the EDFA and OPSW modules.
Document Number
RFC 1213
RFC 2737
Proprietary MIB
ANSI/SCTE 38-1 2002
ANSI/SCTE 38 2002
ANSI/SCTE 38-2 2002
ANSI/SCTE 38-3 2002
ANSI/SCTE 38-5 2002
ANSI/SCTE 38-8 2002
ANSI/SCTE 38-11 2003
ANSI/SCTE 83-1 2006
ANSI/SCTE 84-1
ANSI/SCTE 85-3 2004
ANSI/SCTE 85-4 2003
The following access codes (Code) are used in the MIB tables in this chapter.
Code
RO - Read Only
RW - Read-Write
na - Not Applicable
OL-29937-01
Description
MIB-2 System MIB
MIB-2 Entity MIB
SA-HMS-GS7000-FIBERNODE-MIB
SCTE-ROOT
SCTE-HMS-ROOTS
SCTE-HMS-PROPERTY-MIB
SCTE-HMS-ALARMS-MIB
SCTE-HMS-COMMON-MIB
SCTE-HMS-FIBERNODE-MIB
SCTE-HMS-DOWNLOAD-MIB
SCTE-HMS-HEADENDIDENT-MIB
SCTE-HMS-HE-OPTICS-MIB
SCTE-HMS-HE-COMMON-MIB
SCTE-HMS-HE-OPTICAL-AMPLIFIER
SCTE-HMS-HE-OPTICAL-SWITCH-MIB
Description
Data is displayed for reading.
Data can be read and changed.
Data is not applicable to the equipment.

MIBs Used in the Optical Hub/Node

35