Communication Access Location - GE T2100-ST1 Operator's Manual

Communication Access Location

The communication ports are located at the very front of the
treadmill near the center of the unit.
Two ports are offered with equal communication capability. The
standard female RS232 port and a USB Type B port offer
connectivity diversification.
To communicate to the T2100-ST1 or T2100-ST2 treadmill using the
USB port, you will need to install the appropriate USB driver
software on your host computer. The USB driver is supplied on the
provided flash drive. When connecting to the USB port, ensure port
configuration is congruent with your software port identification.
1
Item
1
2
2097937-001 Rev E
12 June 2017
2
Description
RS232 Port "Female"
USB "B" Port
T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V
Assembly and Setup
33