Product And Package Information; Symbols - GE T2100-ST1 Operator's Manual

Introduction
 Never attempt to remove the motor pan hood or do electrical
repairs yourself. Repairs should only be done by a factory
authorized repair provider.
 Always unplug the T2100-ST Series Treadmill when servicing,
inspecting or cleaning the treadmill.
 Routinely inspect the treadmill for loose parts.
 Inspect handrails and ensure they will support the patient
properly.
 Always start the running belt at its slowest speed before
starting the patient test.
 Do not step onto belt when it is moving.
 Always slow the running belt to its minimum speed before
stopping.
 Keep hands, feet, and clothing away from any moving parts.
 Verify no one is near the elevation mechanism before
operating. Never put any part of the body under any part of a
running treadmill.
 Never drop or insert objects into any opening.
 Never drape garments, hook-up leads, or other equipment over
the side rails or drop objects on the belt while the T2100-ST
Series Treadmill is running.
 Do not allow moisture or oils to accumulate on equipment,
creating a slip hazard.

Product and Package Information

This section describes the location of the labels used on your device
and its packaging. It also describes the symbols used on the labels.

Symbols

The following symbols may appear on the device or its packaging.
Familiarity with these symbols assists in the safe use and disposal
of the equipment. For equipment symbols not shown, refer to the
original equipment manufacturers (OEM) manuals.
Symbols are used to convey warnings, cautions, prohibitions,
mandatory actions, or information. Any hazard symbols on your
device or packaging with markings in color indicates there is certain
danger and is a warning. Any hazard symbols on your device or
packaging that is in black and white indicates a potential hazard
and is a caution.
14 T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V 2097937-001 Rev E
12 June 2017