Removal And Installation Of Options - Toshiba e-STUDIO556 Service Manual

4.13 Removal and Installation of Options

4.13.1 Finisher
(1) Press the [ON/OFF] button on the control
panel to shut down the equipment.
(2) Turn the power OFF using the main power
switch of the equipment.
(3) Unplug the power cable.
(4) Take off the connector cover and unplug the
interface cable.
(5) Remove 1 screw and take off the finisher
from the slide rail.
Note:
When moving the finisher unit by itself, be
careful that it does not topple over.
4.13.2 Large Capacity Feeder (LCF)
(1) Press the [ON/OFF] button on the control
panel to shut down the equipment.
(2) Turn the power OFF using the main power
switch of the equipment.
(3) Unplug the power cable.
(4) Press the button to separate the Large
Capacity Feeder (LCF) from the equipment.
e-STUDIO556/656/756/856(Ver03)
DISASSEMBLY AND REPLACEMENT
Interface cable
© 2012 TOSHIBA TEC CORPORATION All rights reserved
4 - 162
Connector cover
Fig. 4-461
Slide rail
Fig. 4-462
Fig. 4-463